FCC grants Tesla waiver for UWB in wireless EV charging

The US Federal Communications Commission has approved a waiver for Tesla to use Ultra-Wideband radio technology in its wireless charging system for the Cybercab electric vehicle. This exception allows fixed outdoor installation of the technology, which typically requires handheld devices. The decision hinges on the system's low power and limited operation.

On February 19, 2026, the Federal Communications Commission (FCC) officially granted Tesla a waiver to deploy Ultra-Wideband (UWB) radio technology in its wireless electric vehicle (EV) charging system, specifically for the Cybercab. This technology enables precise positioning for efficient wireless charging.

Under standard regulations, UWB devices must be handheld and cannot be affixed to outdoor fixed equipment. Tesla's setup involves a UWB transceiver on the vehicle communicating with another on a ground-level pad, which may be outdoors. The waiver addresses this restriction, citing several mitigating factors: the signal operates at very low power, activates only briefly during parking, functions at short range, and poses no risk of interference with other systems.

According to details from Tesla's filing, the system begins with Bluetooth for the vehicle to locate the ground pad and exchange data. As the vehicle nears, UWB transceivers track its position to confirm optimal alignment over the pad before initiating wireless power transfer. The UWB signals are impulse-based, occurring momentarily at ground level between the vehicle and pad, and are significantly weakened by the vehicle's body once positioned.

Tesla emphasized in its request that these characteristics ensure safe and contained operation. The approval marks a step forward for Tesla's wireless charging ambitions, aligning with its development of autonomous EVs like the Cybercab.

Relaterede artikler

Tesla Cybercab with EPA certification documents and specs displayed
Billede genereret af AI

Tesla Cybercab receives EPA certification revealing detailed specs

Rapporteret af AI Billede genereret af AI

Tesla's Cybercab has obtained a Certificate of Conformity from the EPA, clearing a regulatory step for the autonomous robotaxi. The certification confirms compliance with federal and California emissions standards as a zero-emission vehicle. Public documents also disclosed technical details including weight, battery size, and range.

Hundreds of Tesla Cybercab vehicles have been observed at Gigafactory Texas with new side decals, signaling potential entry into the company's ride-hailing fleet soon. The sightings follow the vehicle's recent receipt of an EPA Certificate of Conformity. Observers note the addition mirrors prior Model Y markings used during a similar launch about a year ago.

Rapporteret af AI

A senior Texas transportation leader praised the Tesla Cybercab after sitting inside the vehicle at a state event on June 17. Marc Williams, executive director of the Texas Department of Transportation, highlighted its design as evidence of rapid change in mobility.

Dette websted bruger cookies

Vi bruger cookies til analyse for at forbedre vores side. Læs vores privatlivspolitik for mere information.
Afvis