Tesla's inaugural production Cybercab, a driverless robotaxi, unveiled on the Gigafactory Texas factory floor amid celebrating workers.
Tesla's inaugural production Cybercab, a driverless robotaxi, unveiled on the Gigafactory Texas factory floor amid celebrating workers.
AI에 의해 생성된 이미지

Tesla rolls out first production Cybercab at Texas factory

AI에 의해 생성된 이미지

Tesla has produced its first Cybercab, a steering wheel-less autonomous vehicle, at Gigafactory Texas. The company shared a photo of the milestone on X, with volume production planned for April 2026. The Cybercab is designed exclusively for robotaxi service, raising questions about the readiness of Tesla's self-driving technology.

On February 17, 2026, Tesla announced that the first production unit of its Cybercab had rolled off the assembly line at Gigafactory Texas, located just outside Austin. The vehicle, a two-seater with butterfly doors, lacks a steering wheel, pedals, and side mirrors, relying entirely on autonomous driving software for operation. It features a 35 kWh battery offering about 200 miles of range and inductive charging, with a projected price under $30,000.

CEO Elon Musk has emphasized the Cybercab's role in Tesla's shift toward autonomy, stating that production lines could eventually produce one unit every 10 seconds. In a post on X, Musk referenced a bet with YouTuber Marques Brownlee (MKBHD), who doubted a sub-$30,000 price before 2027 and offered to shave his head if wrong; Musk replied, "it's gonna happen."

Tesla began testing Model Y vehicles as robotaxis in Austin in June 2025, expanding to San Francisco with around 200 vehicles total. However, reports highlight challenges with the technology. Electrek's analysis of the Austin pilot showed 14 crashes over 800,000 miles, equating to one incident every 57,000 miles—nearly four times the human driver rate of one per 229,000 miles. Availability stood at 19% over a 48-hour period, and many "unsupervised" rides involved trailing safety vehicles with monitors.

Musk acknowledged in January 2026 that Tesla needs about 10 billion miles of data for safe unsupervised self-driving, projecting the milestone around July 2026, followed by further training and testing. The Cybercab will use current-generation AI4 hardware, as the next AI5 chip is delayed to mid-2027. Tesla's chairwoman, Robyn Denholm, suggested a steering wheel might be needed, but Musk dismissed it. Prototypes were spotted with wheels in Austin last year, and the "Cybercab" trademark remains unsecured, with a deadline extension to March 14.

The U.S. National Highway Traffic Safety Administration is investigating Full Self-Driving (FSD) software across 2.9 million vehicles for traffic law violations, based on 62 complaints as of December 2025. Unlike competitors like Waymo, which use lidar and radar alongside cameras, Tesla relies solely on cameras and software. Musk described autonomy as "pretty much a solved problem," with validation underway for production.

Tesla has a history of hardware changes betting on autonomy, such as removing radar in 2021 and turn signal stalks in 2023, later reversing some decisions with retrofits costing up to $700. Critics view the Cybercab as the most extreme such bet, with no fallback if software issues persist.

사람들이 말하는 것

Reactions on X to Tesla's first production Cybercab at Giga Texas are largely celebratory, with users hailing it as a transformative milestone for autonomous transport and ride-hailing disruption. Elon Musk and influencers congratulated the team, while some highlighted skeptics like MKBHD being challenged. Skeptical voices questioned FSD readiness, regulatory hurdles, and infrastructure preparedness ahead of April volume production.

관련 기사

Photorealistic illustration of Tesla Cybercab production launch in factory, Elon Musk announcing amid robotaxi service confusion with Model Y in Austin.
AI에 의해 생성된 이미지

Tesla starts Cybercab production amid robotaxi confusion

AI에 의해 보고됨 AI에 의해 생성된 이미지

Elon Musk announced that Tesla's Cybercab production will begin in April, sparking confusion with the company's existing robotaxi service in Austin, Texas. The Cybercab is a steering-wheel-free vehicle unveiled in 2024, distinct from the supervised Model Y robotaxis currently operating. Musk's interchangeable use of terms has fueled online debates about the vehicles' readiness and safety.

Tesla has built its first Cybercab at Gigafactory Texas, marking a milestone toward autonomous vehicle production. CEO Elon Musk confirmed the robotaxi will be available to consumers for under $30,000 before 2027. Series production is set to begin in April.

AI에 의해 보고됨

Production-ready Tesla Cybercab units have been observed at Gigafactory Texas undergoing validation testing without steering wheels or pedals. The sighting suggests Tesla is preparing final versions for crash testing as mass production approaches. This development aligns with the company's plans for an autonomous Robotaxi vehicle.

Tesla has designed the Cybercab as a fully autonomous two-seater electric vehicle set for launch in 2026, prioritizing hyper-efficiency, premium comfort, and low cost per mile. Senior design executive Franz von Holzhausen and chief engineer Eric Earley explain how the project integrates design, engineering, and manufacturing to target the dominant single-occupant ride-share market. The vehicle aims to democratize stylish, door-to-door transportation at prices approaching bus fares.

AI에 의해 보고됨

Tesla initiated unsupervised robotaxi rides in Austin, Texas, on January 22, 2026, advancing its driverless ambitions amid a Full Self-Driving (FSD) subscription overhaul effective February 14, plans for Optimus humanoid robot sales by end-2027, falling vehicle deliveries, and intensifying regulatory probes.

이 웹사이트는 쿠키를 사용합니다

사이트를 개선하기 위해 분석을 위한 쿠키를 사용합니다. 자세한 내용은 개인정보 보호 정책을 읽으세요.
거부